Samsung Galaxy Note N7000 receive new build.1-OFFICIAL-874 Slim Bean Android 4.3 custom Rom update. This is the latest custom rom for Galaxy Note N7000 released earlier today. You can now easily update Galaxy Note N7000 to Slim Bean Android 4.3 which is a Official custom Rom based on Android 4.3, Like always, we have the tutorial on how to install this firmware on your phone with the most easy instructions. This Custom Rom is Developed by SlimTeam. So all credit goes to them.
As you continue reading below, we will guide you through the entire process of how to install Slim Bean Android 4.3 Custom Rom on Galaxy Note N7000 using CyanogenMod. So don’t forget to backup all your apps and personal data as a precaution. It is always better to make a backup before doing anything with your Android device. This is an official modified custom rom update by SlimTeam. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.
There are heaps of useful articles and how-to guides on Mytricksource for Samsung Galaxy Note N7000, however we expect you may have an interest within the following posts:
Like this Slim Bean Custom ROM based on the latest Google Android 4.3? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.
Backup and Other Important Tips
Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything may go wrong. See below for some tips on how to backup data:
2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE on facebook to thank us!
- Backup your Apps. How? –> How to Backup Android Apps.
- Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
- Backup Call History. How? –> How to Backup Call History.
- Backup APN Settings: GPRS, 3G, MMS Settings. How? Note down everything from: Settings > Wireless & Networks (More…) > Mobile networks > Access Point Names.
Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy S3 backup data to HTC One X.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
A few more optional tips that you should remember:
1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode.2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE on facebook to thank us!
All set and ready? Sensible. Now, let’s proceed with the tutorial below and update Galaxy Note N7000 to Slim Bean Android 4.3 Custom ROM.
How to Install Slim Bean Android 4.3 Custom Rom in Galaxy Note N7000
We have put together a detailed step-by-step instructions guide on how to install Slim Bean Android 4.3 Custom firmware on Galaxy Note N7000. If you are used to installing custom ROMs on your Galaxy Note N7000, then this should not be any difficult for you.
However, for beginners, you need to root your Samsung Galaxy Note N7000 and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.
To Remember:
That’s it! Your Galaxy Note N7000 should now have Slim Bean Android 4.3 Custom Rom installed on your phone! Go to Settings > About phone to verify.
- This tutorial is only for installing Slim Bean Android 4.3 ROM on Samsung Galaxy Note N7000. Please do not try on any other Galaxy variants.
- Your phone should be rooted and have ClockworkMod recovery installed from before.
- This tutorial will wipe out all your data. Proceed at your own risk.
- Perform a Dalvik Cache wipe before proceeding from the recovery mode.
- Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
- Make sure you backup all your data in your phone before proceeding.
Entire Step-By-Step directions:
Step 1 - Download Slim-n7000-4.3.build.1-OFFICIAL-874 Custom Rom and Google Apps for Galaxy Note N7000 on your computer.
Step 2 - Connect and mount your Galaxy Note N7000 USB memory on your computer using the USB cable.
Step 3 - Now copy/paste the downloaded Slim Bean Android 4.3 zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” carefully.
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Slim-n7000-4.3 build.1-OFFICIAL-874 zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Note: Repeat the same process with Google Apps as well as you did in step 10.
Step 3 - Now copy/paste the downloaded Slim Bean Android 4.3 zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” carefully.
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Slim-n7000-4.3 build.1-OFFICIAL-874 zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Note: Repeat the same process with Google Apps as well as you did in step 10.
Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now”
Your Galaxy Note N7000 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
Your Galaxy Note N7000 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy Note N7000 should now have Slim Bean Android 4.3 Custom Rom installed on your phone! Go to Settings > About phone to verify.
my galaxy note n7000 turn off while copying the zip file from my sd now its not turning on..plss help
ReplyDeletefake file
ReplyDeleteHi admin. i already done flasing my N7000. Perfect! Somehow im facing 1 problem. the screen resolution. Somehow, the resolution looks funny. it has been smaller than the normal. So the icon looks smaller and the 5 main icon which is " Camera Internet Menu Contact Dialer " are not center of the screen. Can you help me about this isue? u can contact me via email - akufiqo@gmail.com
ReplyDelete