Samsung Galaxy Note II N7100 receive new build.5 Slim Bean Android 4.2.2 custom Rom update. You can now easily update Galaxy Note II N7100 to Slim Bean Android 4.2.2 which is a build 5 Official custom Rom based on Android 4.2.2, Like always, we have the tutorial on how to install this firmware on your phone with the most easy instructions. This Custom Rom is Developed by SlimTeam. So all credit goes to them.
As you continue reading below, we will guide you through the entire process of how to install build.5 Slim Bean Custom Rom on Galaxy Note II N7100 using CyanogenMod. Don’t forget to backup all your apps and personal data as a precaution. It is always better to make a backup before doing anything with your Android device. This is an official Custom firmware update by SlimTeam, a modified custom ROM. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.
There are tons of article on MyTrickSource for Galaxy Note 2, but you might have interest on the following articles:
Like this Slim Bean Custom ROM based on the latest Android 4.2.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.
Backup and Other Important Tips
Always backup your important data
that you might need after you install a new custom ROM, an official
software update or anything else. Make a backup for just in case, you
never know when anything might go wrong. See below for some tips on how to backup data:
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE on facebook to thank us!
- Backup your Apps. How? –> How to Backup Android Apps.
- Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
- Backup Call History. How? –> How to Backup Call History.
- Backup APN Settings: GPRS, 3G, MMS Settings. How? Note down everything from: Settings > Wireless & Networks (More…) > Mobile networks > Access Point Names.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
A few more optional tips that you should remember:
1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode.2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE on facebook to thank us!
All set and ready? Good. Now, let’s proceed with the tutorial Below and Install build.5 Slim Bean Android 4.2.2 ROM on Galaxy Note II N7100
How to Install Slim Bean Android 4.2.2 Custom Rom in Galaxy Note II N7100
We have put together a detailed step-by-step instructions guide on how to install Slim Bean Android 4.2.2 Custom firmware on Galaxy Note II N7100. If you are used to installing custom ROMs on your Galaxy Note II N7100, then this should not be any different for you.
However, for beginners, you need to root your Samsung Galaxy Note II N7100 and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.
To Remember:
That’s it! Your Galaxy Note II N7100 should now have Slim Bean Android 4.2.2 Custom Rom installed on your phone! Go to Settings > About phone to verify.
- This tutorial is only for installing Slim Bean Android 4.2.2 ROM on Samsung Galaxy Note II N7100. Please do not try on any other Galaxy variants.
- Your phone should be rooted and have ClockworkMod recovery installed from before.
- This tutorial will wipe out all your data. Proceed at your own risk.
- Perform a Dalvik Cache wipe before proceeding from the recovery mode.
- Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
- Make sure you backup all your data in your phone before proceeding.
Complete Step-By-Step Instructions:
Step 1 - Download Slim-n7100-4.2.2.build.5-OFFICIAL Custom Rom for Galaxy Note II N7100 to your computer.
Step 2 - Connect and mount your Galaxy Note II N7100 USB memory on your computer using the USB cable.
Step 3 - Now copy/paste the downloaded Slim Bean Android 4.2.2 zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Slim Bean Android 4.2.2 zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 3 - Now copy/paste the downloaded Slim Bean Android 4.2.2 zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Slim Bean Android 4.2.2 zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now”
Your Galaxy Note II N7100 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
Your Galaxy Note II N7100 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy Note II N7100 should now have Slim Bean Android 4.2.2 Custom Rom installed on your phone! Go to Settings > About phone to verify.
Hello
ReplyDeleteyou said:"Your phone should be rooted and have ClockworkMod recovery installed from before"
my Galaxy Note 2(N7100) is rooted, but from WHERE I shoud download "ClockworkMod Recovery" and I think It has .img format?!
How should I install it?
Can you please explain more?
Thx in advance
I will post for ClockworkMod Recovery in Galaxy Note 2(N7100 soon in Mytricksource. Keep Visiting !
DeletePlz dont install it... its just a waste !!
ReplyDeletesmall icons.. camera not working !!
lots of problems..
This is a custom ROM updated by Slim Bean and company, So you may not access something in ur phone as i already described above in the article: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (MyTrickSource) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial
DeleteThere's som mod to have Smartstay and the others from Samsung?
ReplyDeletei followed your instruction and changed the rom but its not working for me. now i want to change to another frimware but i cant do it following your instruction...
ReplyDeletei can get cwm-based recover mode but i cant find the frimware files which i copied to storage...
My kies does not recognise my device since upgrading to the slim bean rom's jelly bean 4.2.2 can someone please help.
ReplyDeleteMy kies does not recognise my device since upgrading to the slim bean rom's jelly bean 4.2.2 can someone please help.
ReplyDeleteYour Kies will not recognize a device with any other firmware but the original Samsung one.
ReplyDeletei install the slimbuild 4.2.2 build8
ReplyDeleteeverything is correct
but my windows pc unable to recognize my phone in any mode ???
how can i solved it ???