CM10.1 M3 Android 4.2.2 ROM for T-Mobile Samsung Galaxy Note SGH-T879 is now available for download and can be installed using ClockworkMod Recovery. Milestone 3 of CM10.1 brings a lot of more features than their previous release and is very stable and a fast ROM. Android 4.2.2 CM10.1 custom ROM is still in development with new releases
almost every day, but CM10.1 M3 release is relatively stable and can be used as a daily driver. You can now install CM10.1 M3 Android 4.2.2 Jelly Bean on Galaxy Note SGH-T879 using the tutorial below. Android 4.2.2 is also available for AT&T Galaxy Note, read the tutorial here!
In this tutorial, we will tell you how to update T-Mobile Galaxy Note T879 to CM10.1 M3 Android 4.2.2 Jelly Bean firmware with complete steps using CWM recovery. Don’t forget to read our important tips given below that you have to keep in mind before proceeding to the tutorial on the next page. Make sure you backup all the data as we will have to wipe your previous personal data and apps. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s begin with the tutorial below.
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (MyTrickSource) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial ;-)
CM10.1 M3 Android 4.2.2 Jelly Bean ROM Details:
NOTE: Since this is a nightly build, make sure you know that after installing this firmware update, your Android device can get FC errors, boot loops, several other bugs, apps might not work or worse, your phone might not boot. To fix, you will have to reinstall stock firmware or any other stable custom ROM.T-Mobile Galaxy Note USB Drivers
You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for T-Mobile Galaxy Note properly. If not, you can download the latest official drivers from our Android USB Drivers section here:Download T-Mobile Galaxy Note USB drivers!
Backup and Other Important Tips on Android
Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:
- Backup your Apps. How? –> How to Backup Android Apps.
- Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
- Backup Call History. How? –> How to Backup Call History.
- Backup APN Settings: GPRS, 3G, MMS Settings. How? Note down everything from: Settings > Wireless & Networks (More…) > Mobile networks > Access Point Names.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
A few more optional tips that you should remember:
1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode.2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!
All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update Galaxy Note SGH-T879 to CM10.1 M3 Android 4.2.2 Jelly Bean custom firmware.
HOW TO: Install CM10.1 M3 Android 4.2.2 Jelly Bean on T-Mobile Galaxy Note SGH-T879
We have put together a detailed step-by-step instruction guide on how to install CM10.1 M3 Android 4.2.2 Jelly Bean on Galaxy Note SGH-T879. If you are used to installing custom ROMs on your T-Mobile Galaxy Note SGH-T879, then this should not be any different for you.
However, for beginners, you need to root your T-Mobile Galaxy Note and install a custom recovery. Please Google that up if you are unsure and read the entire tutorial once before actually performing it.
To Remember:
- This tutorial is only for installing CM10.1 M3 Android 4.2.2 Jelly Bean on T-Mobile Galaxy Note SGH-T879. Please do not try on any other Galaxy Note variants.
- Your phone SHOULD be rooted.
- This tutorial will wipe out all your data. Proceed at your own risk.
- Perform a Dalvik Cache wipe before proceeding from the recovery mode.
- Samsung KIES will NOT detect your phone after installing CM10.1 M3 Android 4.2.2 Jelly Bean because it is a custom ROM.
- ClockworkMod recovery should be installed from before.
- Make sure you backup all your data in your phone before proceeding.
Complete Step-By-Step Instructions:
Step 1- Download CM10.1 M3 Android 4.2.2 ROM and Google Apps zip for Galaxy Note to your computer.
Step 2 - Connect and mount your Galaxy Note USB memory on your computer using the USB cable.
Step 3 - Now copy/paste the downloaded Android 4.2.2 ROM zip and Google Apps zip filesto your SD card. Make sure the files are in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Volume Down + Power buttons, continue to hold all three until the screen flashes, then release all buttons.
Step 6 - In ClockworkMod recovery, perform a full data wipe first. Then scroll down to “flash zip from SD card” and press the Power Button to select it.
Step 7 - Press the Power button again and select “choose zip from sdcard”.
Step 8 - Now using your volume keys, navigate to the Android 4.2.2 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
NOTE: Repeat this step for the Google Apps zip file as well.
Step 9 - After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. The phone will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your T-Mobile Galaxy Note should now have CM10.1 M3 Android 4.2.2 Jelly Bean installed on your phone! Go to Settings > About phone to verify.
Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.
0 comments:
Post a Comment