Update Galaxy Tab 7.0 Plus P6200 to XXMC3 Android 4.1.2 Jelly Bean Official Firmware


XXMC3 Android 4.1.2 Jelly Bean official firmware for Galaxy Tab 7.0 Plus P6200 is now available for download. You can get this latest Jelly Bean firmware for the Galaxy Tab 7.0 Plus from Samsung KIES, or if you can’t get this update for your region, you can always follow our easy tutorial below for manually updating your tablet with this new firmware using Odin. P6200XXMC3 was just released earlier today so it will be rolled out to all the regions in a few days/weeks. This is an unbranded firmware and can be installed on any
Galaxy Tab 7.0 Plus. You can install XXMC3 Android 4.1.2 Jelly Bean official firmware on Galaxy Tab 7.0 Plus P6200 now using the tutorial below.

As you read further, we will guide you through the entire process of how to update Galaxy Tab 7.0 Plus P6200 to XXMC3 Android 4.1.2 official firmware using ODIN. Make sure you backup all your data from the given tools below as a precaution and don’t forget to read the important tips given below as you have to keep them in mind. You never know when something might go wrong. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial below.


Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (MyTrickSource) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

XXMC3 Android 4.1.2 Firmware Details:

PDA: P6200XXMC3
CSC: P6200OXAMC3
Version: 4.1.2
Date: 2013 March
Regions: Saudi Arabia

Samsung Galaxy Tab 7.0 Plus USB Drivers

You will need to connect your Android tablet with the computer. For that, please make sure you have installed the Android 4.1.2 USB drivers for Samsung Galaxy Tab 7.0 Plus properly. If not, you can download the latest official drivers from our Android USB Drivers section here:
Download Samsung Galaxy Tab 7.0 Plus USB drivers!

Backup and Other Important Tips of Galaxy Tab 7.0 Plus

Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:
Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:



       Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy S3 backup data to HTC One X.

          If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

      A few more optional tips that you should remember:

      1. Having problems connecting your Android tablet to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

      2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your tablet goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your tablet might get bricked or go dead permanently. No one wants that, right?


      3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your tablet is locked to a carrier, unless we have specified the carrier name or device model.

      If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!
      All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update Galaxy Tab 7.0 Plus P6200 to XXMC3 Android 4.1.2 Jelly Bean firmware.

      How to Update Galaxy Tab 7.0 Plus to XXMC3 Android 4.1.2 Jelly Bean

      We have put together a detailed step-by-step instructions guide on how to update Samsung Galaxy Tab 7.0 Plus to XXMC3 Android 4.1.2 Jelly Bean. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.
      Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.





      To Remember:

      This XXMC3 Jelly Bean firmware tutorial is only for Samsung Galaxy Tab 7.0 Plus P6200. Please don’t try this on any other variants of the tablet.
      All your USB drivers should be installed properly.
      Make sure you backup all your data in your tablet before proceeding.

      Rooting Warning: This is an official XXMC3 Android 4.1.2 update for Galaxy Tab 7.0 Plus P6200, which means you will lose root as soon as you install this update . You will again have to root Galaxy Tab 7.0 Plus to gain full system access and be able to install root apps again. We will post a full tutorial on how to root Galaxy Tab 7.0 Plus P6200 on 4.1.2 Jelly Bean soon.

      Complete Step-By-Step Instructions:

      Step 1 - Download Android 4.1.2 P6200XXMC3 for Galaxy Tab 7.0 Plus to your computer and extract the zip file.

      Step 2 - Download ODIN v1.85 which will help you to install Android 4.0.3 on Samsung Galaxy Tab 7.0 Plus P6200.


      Step 3 - Switch off your tablet. Now to get in the bootloader mode. Turn on the phone while pressing and holding the Volume Down and Power buttons, till you see the Samsung logo or the construction Android robot and a triangle. This is the Download Mode.


      Step 4 - Make sure you have your Galaxy Tab 7.0 Plus USB drivers installed on your computer.


      Step 5 - Open ODIN on your computer. Connect your tablet to your computer while it is in the Download Mode.


      Step 6 - If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.


      Step 7 - Now select the files that you have to flash/install on your tablet. These files are to be found from the extracted files in Step 1.



      • Click on ‘PDA’ and select file with ‘CODE’ in its name.
      • Click on ‘tablet’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
      • Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
      • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
      Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

      Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.


      Step 10 - After the installation is completed, your tablet will restart. After you see the home screen, unplug your tablet from the computer.

      That’s it. Your Samsung Galaxy Tab 7.0 Plus has now been updated to XXMC3 Android 4.1.2 software update. Go to Settings > About tablet to verify.
      Hit +1 or LIKE on facebook to thanks us!
      If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.

      11 comments

      wifi not working In saudia p6200 4.1 jelly bean

      Reply

      WPA2 PSK security in wifi is not working..

      Reply

      @Muhammad waseem

      Had you Removed your SIM Card and SD Card before Flashing this ROM.

      Reply

      @MOHAMED SABIQ

      Had you Removed your SIM Card and SD Card before Flashing this ROM.
      If not then flash again by doing this.

      Reply

      my tablet shut down during the update and i cant charg it any more

      Reply

      hi ! i can't connect to my home wifi after i upgrade my tab into jelly bean. i had removed my sim and sd card while upgraded my tab... HELP ME !

      Reply

      is this your first time flashing?dont panic. before flashing make sure you copy your apn settings. usually you cant connect to wifi because your apn settings is changed even though you removed your sim,what is your sim?

      Reply
      This comment has been removed by the author.

      I again flash it after removing the SIM and SD card.. Again same issue is balance. It connect it in my home but not at in my office. All of my other devices are working both side perfectly.. @Office we are using '3Com Office Connect ADSL Wireless 54mbps 11g firewall Router'.

      Reply

      SMS messaging have problem, it won't refresh as messages comes. I have to launch the shortcut SMS before it refresh

      Reply

      I want to update my samsung galaxy tab but how to update i dont know to do

      Reply

      Post a Comment