MIUI 3 CM7 Custom ROM is now available for Galaxy Y S5360. A new nightly build with the latest firmware updates can be downloaded for this phone. MIUI 3 CM7 brings together some of the best tweaks and features of several custom firmwares in one ROM. If you are interested in Android 4.1 for this phones, please check out here. The team behind MIUI 3 is known for adding the coolest features to this ROM that will make you love your phone even more! You can update Galaxy Y S5360 to MIUI 3 CM7 Custom Firmware using the tutorial below. Your Galaxy Y S5360 should be rooted and have a custom recovery (ClockworkMod recovery / TWRP recovery) installed. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery in order to flash the ROM zip and Google Apps zip files on your phone.
As you continue reading, we will guide you through the entire process of how to Install MIUI 3 CM7 Custom firmware on Galaxy Y S5360 with all the steps required to do so. Please make sure you backup your data as it will be all wiped clean.
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (MTS) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial :)
Like this MIUI 3 CM7 Custom ROM ? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.
Download Samsung Galaxy Y USB drivers!
Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!
All set and ready? Good. Now, let’s proceed with the tutorial below and update Galaxy Y S5360 to MIUI 3 CM7 Custom Firmware.
However, for beginners, you need to root your Samsung Galaxy Y and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.
To Remember:
Step 1 - Download MIUI 3 CM7 Custom ROM and Google Apps for Galaxy Y to your computer.
Step 2 - Connect and mount your Galaxy Y USB memory on your computer using the USB cable.
Step 3 - Now copy/paste the downloaded MIUI 3 CM7 zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the MIUI 3 CM7 zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Note: Repeat this step with Google Apps after installing the ROM.
Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now”
Your Galaxy Y S5360 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy Y should now have MIUI 3 CM7 Custom ROM installed on your phone! Go to Settings > About phone to verify.
Hit +1 or LIKE to thank us!
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (MTS) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial :)
MIUI 3 CM7 Custom ROM Features:
- Over 200 functions (Making life a bit easier).
- Phone & SMS (Better Call & SMS Experience).
- Reliable Privacy Protection.
- Equipped with Kingsoft, Wall-E, LBE and other security software to protect device contents.
- Customization on another Level.
- Personalized themes, numerous lockscreens & variety of MISpace to choose from.
- Special Front Sizes (Suitable of your Retina).
- Music, Gallery, Calculator, Camera, FM Radio, Sound Recorder, Compass & Updater.
There are tons of useful articles and how-to guides on MyTrickSource for the Samsung Galaxy Y, but we think you might be interested in the following posts:
Samsung Galaxy Y USB Drivers
You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Y properly. If not, you can download the latest official drivers from our Android USB Drivers section here:Download Samsung Galaxy Y USB drivers!
Backup and Other Important Tips
Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:
- Backup your Apps. How? –> How to Backup Android Apps.
- Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
- Backup Call History. How? –> How to Backup Call History.
- Backup APN Settings: GPRS, 3G, MMS Settings. How? Note down everything from: Settings > Wireless & Networks (More…) > Mobile networks > Access Point Names.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
A few more optional tips that you should remember:
1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode.2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!
All set and ready? Good. Now, let’s proceed with the tutorial below and update Galaxy Y S5360 to MIUI 3 CM7 Custom Firmware.
HOW to Install MIUI 3 CM7 Custom ROM on Samsung Galaxy Y S5360
We have put together a detailed step-by-step instructions guide on how to install MIUI 3 CM7 Custom ROM on Galaxy Y S5360. If you are used to installing custom ROMs on your Galaxy Y S5360, then this should not be any different for you.However, for beginners, you need to root your Samsung Galaxy Y and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.
To Remember:
- This tutorial is only for installing MIUI 3 CM7 Custom ROM on Galaxy Y S5360. Please do not try on any other Galaxy Y variants.
- Your phone should be rooted and have ClockworkMod recovery installed from before.
- This tutorial will wipe out all your data. Proceed at your own risk.
- Perform a Dalvik Cache wipe before proceeding from the recovery mode.
- Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
- Make sure you backup all your data in your phone before proceeding.
Entire Step-By-Step Instructions:
[RECOMMENDED] Be on a stock ROM, Installation will be cleaner.
Download THIS EXT4 tool, the Kernel and the Rom on your device.
Flash on Samsung recovery (or your recovery if you are not on stock).
After the installation, flash the Kernel [Download it from here]
When the Kernel is installed, go, on the CWM, to advanced --> Reboot recovery (This will Reboot the device, and turn it on on the new CWM of kernel). Now follow the process below.
Step 2 - Connect and mount your Galaxy Y USB memory on your computer using the USB cable.
Step 3 - Now copy/paste the downloaded MIUI 3 CM7 zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the MIUI 3 CM7 zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Note: Repeat this step with Google Apps after installing the ROM.
Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now”
Your Galaxy Y S5360 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy Y should now have MIUI 3 CM7 Custom ROM installed on your phone! Go to Settings > About phone to verify.
Hit +1 or LIKE to thank us!
0 comments:
Post a Comment