The latest official firmware update DDCMC1 Android 4.1.2 can now be rooted on Galaxy Tab 2 7.0 P3100 and we have an entire tutorial below for that. Rooting an Android device voids your warranty, but many of you are fine with taking that risk because of the advantages offered by root apps and other mods. This root tutorial method works on Galaxy Tab 2 7.0 P3100 with DDCMC1 Android 4.1.2 Jelly Bean. ClockworkMod Recovery is not at all needed for this tutorial, Please note, CWM Recovery will not be installed with this root package. — only SuperSU and root binary will be installed. You can now root DDCMC1 Android 4.1.2 Jelly Bean on Galaxy Tab 2 7.0 P3100 official firmware using the tutorial below.
As you read further, we will guide you through the entire process of how to root Galaxy Tab 2 7.0 P3100 on DDCMC1 Android 4.1.2 official stock firmware. It is not really necessary, but please make sure you backup your tablet and also read all the important tips given below before proceeding to the tutorial. Rooting will allow you to install custom ROMs, system tweaks and root apps i.e Set CPU, Titanium Backup etc. Read our list of the essential root apps available! The following tips are important as they will help the rooting procedure to go smooth without any issues. Let’s continue below to the tutorial.
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (MyTrickSource) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial ;-)
Root DDCMC1 Android 4.1.2 Jelly Bean – CF-Auto-Root Details:
For those who do not know about CF-Auto-Root:
CF-Root is the root for “rooting beginners” and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.
NOTE: Using this root increases your flash counter. You should run Triangle Away after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.
Make sure, you are on the DDCMC1 Android 4.1.2 firmware on your Galaxy Tab 2 7.0 tablet. How? Read this here: How to Update Galaxy Tab 2 7.0 P3100 to DDCMC1 Android 4.1.2 Jelly Bean Official Firmware.
You may also like to Read: Benefits of Rooting Android Phones/Tablets
There are tons of usefull article for Galaxy Tab 2 7.0 P3100 on MyTrickSource, but we Suggest you for the following:
Samsung Galaxy Tab 2 7.0 USB Drivers
You will need to connect your Android phone with the computer. For that,
please make sure you have installed the USB drivers for Samsung Galaxy
S2 properly. If not, you can download the latest official drivers from
our Android USB Drivers section here:
Download Samsung Galaxy S2 USB drivers!
Download Samsung Galaxy S2 USB drivers!
Backup and Other Important Tips on Android
Done with the USB drivers? Perfect. The tutorial is on the next page,
but first, please take a look at the following tips and important points
you need to take care of. These are important, as we don’t want anyone
losing their personal data or apps:
Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:
Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:
- Backup your Apps. How? –> How to Backup Android Apps.
- Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
- Backup Call History. How? –> How to Backup Call History.
- Backup APN Settings: GPRS, 3G, MMS Settings. How? Note down everything from: Settings > Wireless & Networks (More…) > Mobile networks > Access Point Names.
If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.
A few more optional tips that you should remember:
1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode.2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!
All set and ready? Good. Now, let’s proceed with the tutorial on the next page and root Galaxy Tab 2 7.0 P3100 on DDCMC1 Android 4.1.2 official firmware.
You may also like to see: How to Update Galaxy Tab 2 7.0 P3100 with Sungsonic HD Android 4.1.2 Jelly Bean
How to Root Galaxy Tab 2 7.0 on DDCMC1 Android 4.1.2 Firmware
We have put together a detailed step-by-step instructions guide for how to root DDCMC1 Android 4.1.2 on Galaxy Tab 2 7.0 P3100. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you. Note, this tutorial will not install ClockworkMod recovery.Please read every line carefully and make sure you read the tutorial once before actually performing it on your Android device.
To Remember:
- This root method tutorial is only for Samsung Galaxy Tab 2 7.0 P3100. Please do not try on any other Galaxy Tab 2 7.0 variants.
- Make sure you backup all your data in your phone before proceeding as a precaution.
- This root method works for DDCMC1 Android 4.1.2 software update.
- Your Galaxy Tab 2 7.0 should be on an official firmware by Samsung, not a custom ROM.
Complete Step-By-Step Instructions:
Step 1 - Download Root Package – CF-Auto-Root for Samsung Galaxy Tab 2 7.0 to your computer and extract the zip file.Step 2 - Download ODIN v1.85 which will help you to root DDCMC1 Android 4.1.2 on Samsung Samsung Galaxy Tab 2 7.0 P3100.
Step 3 - Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Samsung Galaxy Tab 2 7.0 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your tablet to your computer while your tablet is in the Download Mode.
Step 6 - If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the file that you have to flash/install on your tablet. This file will be found from the extracted file in Step 1.
Click on ‘PDA’ and select the file ‘CF-Auto-Root-espressorf-espressorfxx-gtp3100.zip‘.
Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your tablet will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.
Step 11 - After you see the home screen, unplug your tablet from the computer.
NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.
OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:
Step 11 - Pull out the battery (or keep holding the Power button) to turn OFF the tablet forcefully.
Step 12 - Now boot (turn ON your tablet) with Volume Down + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.
That’s it! Your Samsung Galaxy Tab 2 7.0 has now been rooted on DDCMC1 Android 4.1.2 official software update. Check for the SuperSU app in your apps list to verify.
To make sure you have correctly installed the above root method and it’s working, verify with Root Checker as given in the link.
Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.
0 comments:
Post a Comment